Small Engine Repair – Tune up your SNOW BLOWER before the big snow hits!

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Mark Parslow Mark Parslow 1 year, 8 months ago.

Viewing 1 post (of 1 total)
  • Author
  • #261923
    Author identity withheld
    Log in to see author

    Call or TEXT Mark: 312.282.9516

    Need your snow blower or other small engine tuned up?

    Snowblower tuneup – locations and expected wait time as of 2:30 pm, Dec. 09, 2017 …

    Ace hardware: 1 week backlog and growing
    Jack’s Tool Rental: 2 week backlog and growing
    Right at your home: 24-48 hours and NOT growing.

    I come to your home and pick up your snow blower for FREE anywhere in Riverside, North Riverside, Brookfield, and other nearby locations. My shop is under 24-hour video surveillance and is behind a locked gate, so no worries while it is in my hands.

    And my prices are a lot more reasonable. Often, I bring it back the same day! I don’t pick up more than I can handle and end up keeping it for 6 weeks in line behind a hundred other machines. The most I ever have to work on is 6 at one time. I can do them all in a day if I have all the parts.

    Call or TEXT me your name and address. 312.282.9516

    HALF TUNEUPS – $50

    1. Rinse the old gas out of the tank with fuel system cleaner
    2. Rinse the residue out of the carburetor bowl
    3. Replace the spark plug
    4. Start it up!


    1. Oil change
    2. Remove old fuel and rinse out gas tank
    3. New fuel line
    4. New spark plug
    5. Disassemble and clean the carburetor in an ULTRASONIC PARTS CLEANER
    6. Rebuild the carburetor with all new gaskets and o-rings


    1. Oil change
    2. Remove old fuel and rinse out gas tank
    3. Install new fuel line
    4. New spark plug
    5. Remove the old carburetor and put a new carburetor on your machine
    * note: This includes any carburetor that costs up to $60. If it costs more than $60, you only pay the difference.

    Don’t pay a non-refundable deposit, cross your fingers, and hope the other guys get it right.
    I have a NO-PAY GUARANTEE!
    If it doesn’t start when I get it done, you don’t pay! Not even for the parts I put in!

    I also recycle old machines. Free pickup and haul away on anything with a small engine. I dissect them. Research. I’m thinking of designing a new engine and I am actively working on a new snowblower design of my own!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.